Saipem is a leading company in engineering, drilling and construction of major projects in the energy and infrastructure sectors. It is “One-Company” organized in five business divisions (Offshore E&C, Onshore E&C, Offshore Drilling, Onshore Drilling and XSight, dedicated to conceptual design).
Saipem is a global solution provider with distinctive skills and competences and high-tech assets, which it uses to identify solutions aimed at satisfying customer requirements. Listed on the Milan Stock Exchange, it is present in over 60 countries worldwide and has 32 thousand employees of 120 different nationalities.
We are seeking for best candidates to fill the vacant position:
1.POSITION : Piping 3D Designer S3D (7 Position)
Department/Project : Offshore Engineering (PIPING)/NFPS EPCO Project
Education : Diploma or equivalent technical vocational degree in appropriate engineering subject
Working Experiences : More than 5 years in similar position or similar field
Working Status : Temporary / Contract (12 months)
Work location : Jakarta
REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
• [SK1004003] - Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors,
• [SK1006001] - Knowledge of tools related to 2D and 3D modelling activities specifically S3D experienced users
• [SK1006003] - User level knowledge of Corporate and Operating Center Discipline technical design software tools. User level knowledge of Corporate and Operating Center IT tools supporting business processes such as electronic document system management, and office automation applications,
• [SK1006006] - Capability to design and coordinate P&IDs for related systems. Full knowledge of Discipline workflow and of Discipline mechanization procedures and criteria. Full knowledge of Discipline P&IDs mechanization battery limits,
• [SK1014001] - Knowledge of basic principles of stress analysis design criteria regarding typical load conditions, stress calculations, comparison criteria with admissible values, Capability to perform calculation relevant to expansion/stress analysis in order to allow flexibility and piping support location,
• [SK1014002] - Basic knowledge and capability to develop plant layout and equipment layout according to process requirements defined on PFD or P&ID and in accordance to the engineering good practices: developing the single line structure to lay the piping distribution and the equipment elevation. Knowledge of plant layout optimization
• [SK1014003] - Knowledge of Piping/Electrical/Instrumental/structural basic terminology and rules,
• [SK2006001] - Specific knowledge of drafting drawing techniques,
BRIEF JOB DESCRIPTIONS
• Design, execute or check the typical Piping and Layout studies including:
• 3D Modelling using SmartPlant®3D / S3D
• 3D Model review with other disciplines and issue of clash check report
• Construction or design drawings using 2D software or extracted from 3D for piping networks (overall plot plan, equipment layout drawings, piping general arrangement, piping isometrics and piping supports)
• Bill of materials or material take off
• Extraction of bill of materials and other information from the 3D CAD model
• Co-ordinate the work of his team with the Piping and Layout engineers of the project
• Check the input data and all the documents and information issued by his team
• Check permanently that all the assumptions upon which his team work is based keep up with the project development and warn the project Piping and Layout Lead of any detected anomaly
• Documents updating after comments issued by other disciplines (inter-discipline checks) or external stakeholders (Client, Yards, Third party review, etc.)
• Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project
• Support design
• Engineering support during construction phase
2.POSITION : Process Engineer (2 Position)
Department/Project : Offshore Engineering (Process)/NFPS EPCO Project
Education : University Graduate from related Technical Academy
Working Experiences : More than 8 years in similar position or similar field
Working Status : Temporary / Contract (12 months)
Work location : Jakarta
REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
• Process Engineers – Graduated from Chemical Engineering
• Has 8 – 15 years of experiences in Oil & Gas Process Design Engineering in an EPC Company
• Experiences in Offshore & upstream plant detailed design is mandatory
BRIEF JOB DESCRIPTIONS
• Process Engineer in NFPS EPCO Project
• To be involved in the document preparation by the client, including all process drawings, calculation reports, and data sheet
3.POSITION : Process Drafters (2 Position)
Department/Project : Offshore Engineering (Process)/NFPS EPCO Project
Education : Min. High School
Working Experiences : More than 8 years in similar position or similar field
Working Status : Temporary / Contract (12 months)
Work location : Jakarta
REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
• Process Drafters
• Has minimum 5 years of experiences in Oil & Gas Process Design Engineering in an EPC Company
• Experiences in drafting intelligent P&IDs using SPPID
BRIEF JOB DESCRIPTIONS
• Process Draftsmen in NFPS EPCO Project
• To be involved in all Process drawings preparation using AutoCAD and SPPID
4.POSITION : Lospe Engineer / Technical Safety Junior/Expert Engineer (3 Position)
Department/Project : Offshore Engineering (LOSPE)/NFPS EPCO Project
Education : University Graduate on Technical Major
Seniority : Junior/Expert Engineer
Working Experiences : Min. 3 years in similar position or similar field
Working Status : Temporary / Contract (12 months)
Work location : Jakarta
REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
1. Personal skills
1.1. For junior engineer, fresh graduate in Chemical Engineering or has one year experience in LOSPE / Technical Safety group, and has an interest in LOSPE / Technical Safety project activities,
1.2. For expert engineer, has experience on development of LOSPE /Technical Safety document and activities both for project bid and project execution with major international Oil&Gas Companies.
2. Technical & professional skill/knowledge (for expert engineer)
2.1. Has capability to develop some of the following technical documents and activities under LOSPE / Technical Safety based on project scope:
• Risk assessment and safety studies e.g. QRA, FERA, EERA, ESSA, DOS, NHRA, RAM study, participation on HAZID/HAZOP/SIL/3D model review workshops,
• Firefighting system including active and passive fire protection philosophy, FW system PID design, FW and foam system hydraulic calculation, specification and data sheet for firefighting equipment and firefighting equipment layout,
• General safety design e.g. HAC, F&G detector system (F&G detector philosophy, F&G layout, F&G detector mapping, F&G cause and effect matrix, SIL verification), safety equipment specification/data sheet and layout, gas dispersion and heat radiation study,
• Environmental engineering e.g. environmental regulation, noise & vibration study, release register.
BRIEF JOB DESCRIPTIONS
• Prepare technical document and activities under LOSPE/Technical Safety based on project scope including calculation, specification and drawing,
• Support procurement, commissioning, construction departments and yard activities,
• Can be mobilized on the project locations including offshore, other Saipem offices both in Indonesia and/or abroad
5.POSITION : Lospe Engineer / Technical Safety Senior/Lead Engineer (2 Position)
Department/Project : Offshore Engineering (LOSPE)/NFPS EPCO Project
Education : University Graduate on Technical Major
Seniority : Senior/Lead Engineer
Working Experiences : More than 10 years in similar position or similar field
Working Status : Temporary / Contract (12 months)
Work location : Jakarta
REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
1. Personal skills
1.1. Has experiences on development of LOSPE /Technical Safety document and activities both for project bid and project execution with major international Oil&Gas Companies,
1.2. Has experiences in engineering management and manage an internal group of engineers,
1.3. Has experiences in interfacing with others discipline, project management, vendors and client.
2. Technical & professional skill/knowledge
2.1. Strong knowledge about LOSPE / Technical Safety regulations, codes & standards,
2.2. Expertise in the various LOSPE / Technical Safety activities:
• 2.2.1. Risk assessment and safety studies e.g. QRA, FERA, EERA, ESSA, DOS, NHRA, RAM study, participation on HAZID/HAZOP/SIL/3D model review workshops,
• 2.2.2. Firefighting system including active and passive fire protection philosophy, FW system PID design, FW and foam system hydraulic calculation, specification and data sheet for firefighting equipment and firefighting equipment layout
• 2.2.3. General safety design e.g. HAC, F&G detector system (F&G detector philosophy, F&G layout, F&G detector mapping, F&G cause and effect matrix, SIL verification), safety equipment, specification/data sheet and layout, gas dispersion and heat radiation study,
• 2.2.4. Environmental engineering e.g. environmental regulation, noise & vibration study, release register
BRIEF JOB DESCRIPTIONS
• Lead/coordinate LOSPE / Technical Safety internal group of the following LOSPE / Technical Safety activities; risk assessment & safety studies, firefighting system, general safety, and environmental engineering,
• Review and/or prepare all document related to point no. #1 including philosophy, calculation, specification and drawing before issue to client, and review document from other disciplines,
• Back to back with LOSPE / Technical Safety lead engineer in the meetings and technical reviews,
• Support procurement, commissioning, construction departments and yard activities,
• Can be mobilized on the project locations including offshore, other Saipem offices both in Indonesia and/or abroad
6.POSITION : Lospe / Technical Safety Senior Designer / Drafter (2 Position)
Department/Project : Offshore Engineering (LOSPE)/NFPS EPCO Project
Education : Min. High school / diploma
Seniority : Senior Designer / Drafter
Working Experiences : More than 5 years in similar position or similar field
Working Status : Temporary / Contract (12 months)
Work location : Jakarta
REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
1. Personal skills
• Has experiences on drafting all LOSPE / Technical Safety drawing; FW system PIDs; HAC layout; Safety, firefighting equipment, and escape route layout; PFP layout; F&G detector layout
2. Technical & professional skill/knowledge
• Strong knowledge and operate following software CAD, SPPID, SP3D, PDMS.
BRIEF JOB DESCRIPTIONS
• Draw all LOSPE / Technical Safety drawing,
• Support engineer to develop drawing for report, and 3D model layout review for LOSPE equipment,
• Can be mobilized on the project locations including offshore, other Saipem offices both in Indonesia and/or abroad
7. POSITION : Electrical Designer (3 position)
Department/Project : Electrical / NFPS EPCO Project
Education : University Graduate on Technical Major
Seniority : Senior Designer
Working Experiences : More than 5 years in similar position or similar field
Working Status : Temporary / Contract (12 months)
Work location : Jakarta
REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
• Knowledge of Engineering standard, codes and regulations
• Knowledge of tools related to 2D and 3D modelling activities and able to 3D design modelling
• Able to design of electrical system (cable routings, grounding, lighting and tracing layouts) and substations arrangements, diagrams and schedule
• Power cable selection and design
• Bulk material definition and take-off
BRIEF JOB DESCRIPTIONS
• Develop electrical system plant design (cable routings, grounding, lighting and tracing layouts) and substations arrangements in 2D or 3D
• Take part in definition of typical installation details and bulk materials selection
• Prepare electrical materials take off (MTOs)
• Prepare bill of quantities for electrical system installation
• Participate in 3D design review
8. POSITION : Electrical Engineer (1 position)
Department/Project : Electrical / NFPS EPCO Project
Education : Min. High school / diploma
Seniority : Expert Engineer
Working Experiences : More than 8 years in similar position or similar field
Working Status : Temporary / Contract (6 months)
Work location : Jakarta
REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
• Knowledge of Engineering standard, codes and regulations
• Capability to perform Electrical Systems calculation and study
• Capability to design electrical systems (power generation and distribution, grounding, lighting, etc.)
• Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work.
• Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors Engineering design and document review
• Capability to perform technical evaluation of vendor bids with reference to Discipline items, bulk material and subcontracted work packages, according to Corporate standards and procedures
BRIEF JOB DESCRIPTIONS
• Review Client technical documentation and requirements
• Prepare Project design criteria and philosophies electrical system
• Define the configuration of the electrical system and the single line diagram
• Perform electrical system calculation and studies (e.g. power demand, load flow, short circuit, transient stability, motor starting) to define the equipment rating
• Prepare relay and metering schemes, protective relays coordination study and setting tables
• Prepare technical documentation (e.g. specifications, data sheets) for electrical equipment and materials
• Check and review technical documentation according to Project procedures
• Prepare Purchase Requisitions and bids technical evaluation
• Perform check and review of Vendor technical documentation
• Provide technical support to Procurement in purchasing and to Post order in expediting and testing
• Develop electrical system plant design (e.g. cable routings, grounding) and substations arrangements
• Define typical installation details, bulk materials selection and take off (MTOs)
• Define bill of quantities and prepare technical documentation for electrical system installation
9. Position : Civil Superintendent (Marine)
Work location : Papua
Requirement:
• Minimal Bachelor Degree from reputable university
• Minimal 10 year experiences and preferable having on Jetty experience
• Excellent communication in English
• Willing to work at site
• Teamwork capability and construction management supervision
• Understanding and perform as per construction schedule
• Having experience constructability Civil Onshore and Civil Offshore
Tasks:
The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements
Tasks include:
• A-Development Technology know how and Commercial support
▪ Provide technical support
• B-Feasibility
▪ Provide technical support
• C-Bidding phase/Commercial proposal development
▪ Analyse and understand Tender documentation
▪ Define preliminary calculation to provide optimized quantity estimation
▪ identify technic al queries, deviations and alternatives to be submitted or implemented
▪ Implement the bidding methodologies, the design criteria’s and guidelines
▪ Provide technical support to Discipline leader for preparation of request for quotation for items not estimated in house
▪ Prepare technical specification for SOW for soil investigation/topographical survey
• D-Project Execution (Job progress and completion)
▪ Review contract project technical documentation and requirements
▪ Prepare design specifications for concrete foundation and steel design
▪ Maintain project technical files
▪ Set up and execute assigned engineering activities such as detail design, verification and studies relevant to any
engineering topic associated to Discipline, pursuing objectives of sound engineering and design optimisation in term of costs, fabrication ease and safety
• Control subcontracted discipline engineering documents
• Develop studies and calculation notes for reinforced concrete, piling works, steel structures (including connection details) and structural concrete/steel buildings
• Prepare SOW and technical documentation for soil investigation contract
• Issue the technical bid tabulation for all geotechnical calls for tender
• Validate and issue project geotechnical specifications
• Provide technic al support to Discipline Lead for preparation of technical specification
• Support the Discipline Lead in technical interface with Client
• Provide design alternatives to prevent or mitigate quantities increase during execution
• Support the Discipline Lead to prepare technical evaluation E-Construction and start up
• Provide support field engineering at site
Expiry date: October 09, 2020
Please send your qualified CV and related Certificate to: recruitment@saipem.com
“Saipem and its subsidiaries recruit their #humanresources through specific procedures, selecting and #hiringcandidates, adopting criteria of merit, ability and professionalism in all #recruitment decisions and will never request payment of any kind. If you want to search #jobopportunities in Saipem. Please refer to the “careers” area of the Saipem website of the official Saipem LinkedIn page and be careful about any other kind of unofficial requests.”
petromindo.com
Komentar
Posting Komentar